• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6

433MHz Wireless Remote Controller Switch 2CH Relay Receiver Module

From R322.66

  • Color:

  • Ships From:

Categories:

Buy With Confidence

100% Safe Payment


;

  • Description

    Control your garage door, motor, car, and light wirelessly with this 433MHz 12V Wireless Garage Door Remote Controller Switch. The 2-channel relay receiver allows for forward and reverse motor control. The accompanying keyfob transmitter provides stable RF signal with a 50m range in open space.

    DC 12V 2 Channel Relay Receiver
    1.The receiver board needs DC 12V voltage to power on.The relay can connect with 1-250V voltage;
    2.Two channel receiver, can make motor forward and reverse.So you can use it to control your motor/garage/gaet/door/light;
    3.10A relay,suitable for most devices;
    4.Three modes: Momentary,Toggle and Latched ,to meet different environment
    2 buttons remote transmitter
    1.There are two different remotes, all can work with this receiver
    2.Stable RF signal,can pass through walls.Support 50 m control in open space
    3.Remote is small size and has keychain,you can put it into your pocket
    Receiver parameter
    Working power: DC 12V
    Size:  1.8*1.5*0.7 in(46*38*17 mm)
    Max current: 10A
    Code: 1527 learning
    Can be controlled: 20 pcs remotes
    Port: +V,-V,NO,NC,COM
    Remote parameter
    Battery: 1*27A12V OR 2* CR2016 (Include)
    With: keychain
    Material: pvc
    Code: 1527 learning
    Button: 2
    Range: support 50 m in open space
    Application
    It can control lights on off. It can control AC and DC motor.

    Stable rf signal and multi control
    One receiver can be controlled by 20pcs remotes;
    One remote can control 5pcs receivers at most

    Product detail
    NO=Normal Open,NC=Normal Close,COM=Common port
    1.Protective Housing: Protect components from damage during shipping and using
    2.Receiving Module: Receive signal from transmitter
    3.Antenna: Extend receiving distance
    4.Learning Button: Press learing button to set up mode
    5.Indicator: Light when connected with power
    6.Blue Protection Terminal: High voltage protection
    7.+12 -12V: Power port

    Remote detail


    Wiring Diagram

    This receiver can work with lamps,bulbs,lights,etc.The receiver itself needs DC 12 V power.And there are two different wirings depends on whether there is an external power too.Here are two pictures:

    This receiver can also work with AC and DC motors, to make them forward and reverse. Here are two pictures :

    Three operating mode

    You can match the Transmitter with the Relay Receiver Module  in 3 modes.

    Momentary Mode:

    1. Press and hold one button, 1st relay will turn on;
    2. Release the button, 1st relay will turn off.

    Toggle Mode:
    1. Press button "A",1st relay will turn on;
    2. Press button "A" again, this relay will turn off.

    Latched mode:

    1. Press button "A", 1st relay will turn on;
    2. Press button "B", this relay will turn off.

    Delete the existing data about operating modes

    Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.

    Note:

    1. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.

    2. After deleted the data, all the remote controls cannot work any more.

    How to set up in these three modes

    Set up(Momentary)

    1. Press the learning button(on the Receiver) once. the indicatior lights up;
    2. Press A button 1 time;
    3. Press B button 1time,the indicator will flash, succeed.

    Set up(Toggle)

    1. Press the learning button(on the Receiver) twice. the indicatior lights up;
    2. Press A button 1 time;
    3. Press B button 1time,the indicator will flash, succeed.

    Set up(Latched)

    1. Press the learning button(on the Receiver) tripe. the indicatior lights up;
    2. Press A button 1 time;
    3. Press B button 1time,the indicator will flash, succeed.

     


    Questions and Answers

    1.How many remotes can control this receiver?

    –About 20 original remotes at most.You can also use clone remotes clone original data.Clone remotes have no quantity limited

     


    2.Can the receiver work in AC 220V?

    –The receiver itself needs DC12V power to work.You can connect with 1-250v extra power with relay

     


    3.Does this receiver have inverter function?

    –No,sir.The input power must be DC 12V.And the input power will not pass throught main board.

     


    4.Do you have a wholesales price?

    –Of course sir,please contact with us.I will give you the best price
    About shipping

    We usually ship the product within 24 hous after you paid it.If you want a fast shipping method,please contact with us.

    *If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*

    *We have hundreds of workers in our factory.We are always willing to have some ODM/OEM business with you.Please contact to us if you need this. *

     




Follow us on:

Subscribe to our Newsletter
Please wait...